Hydro Power

شما می توانید این موضوع را از لینک به زبان فارسی ببینید.
برای مشاهده اینجا را کلیک کنید


When it rains in hills and mountains, the water becomes streams and rivers that run down to the ocean. The moving or falling water can be used to do work. Energy, you'll remember is the ability to do work. So moving water, which has kinetic energy, can be used to make electricity. For hundreds of years, moving water was used to turn wooden wheels that were attached to grinding wheels to grind (or mill) flour or corn. These were called grist mills or water mills.
In the year 1086, the Domesday Book was written. The multi-volume books are very large. Hand-written on the pages of the books are lists of all properties, homes, stores and other things in England. The Domesday Book listed 5,624 waterwheel-driven mills in England south of the Trent River. That was about one mill for each 400 people.
Water can either go over the top of the wheel like in the photograph on the left, or the wheel can be placed in the moving river. The flow of the river then turns the wheel at the bottom like in the moving graphic on the right.
Today, moving water can also be used to make electricity.
Hydro means water. Hydro-electric means making electricity from water power.
Hydroelectric power uses the kinetic energy of moving water to make electricity. Dams can be built to stop the flow of a river. Water behind a dam often forms a reservoir Like the picture of Shasta Dam in Northern California pictured on the right. Dams are also built across larger rivers but no reservoir is made. The river is simply sent through a hydroelectric power plant or powerhouse. You can see this in the picture of The Dalles Dam on the Columbia River along the border of Oregon and Washington State.
Hydro is one of the largest producers of electricity in the United States. Water power supplies about 10 percent of the entire electricity that we use. In states with high mountains and lots of rivers, even more electricity if made by hydro power. In California, for example, about 15 percent of all the electricity comes from hydroelectric.
Picture of Shasta Dam The state of Washington leads the nation in hydroelectricity. The Grand Coulee, Chief Joseph and John Day dams are three of six major dams on the Columbia River. About 87 percent of the electricity made in Washington state is produced by hydroelectric facilities. Some of that electricity is exported from the state and used in other states.

How a Hydro Dam Works

The water behind the dam flows through the intake and into a pipe called a penstock. The water pushes against blades in a turbine, causing them to turn. The turbine is similar to the kind used in a power plant that we learned about in Chapter 6. But instead of using steam to turn the turbine, water is used. The turbine spins a generator to produce electricity. The electricity can then travel over long distance electric lines to your home, to your school, to factories and businesses.
Hydro power today can be found in the mountainous areas of states where there are lakes and reservoirs and along rivers.
Picture of The Dalles Dam














 From:www.energyquest.ca.gov

Nuclear Energy

شما می توانید این موضوع را از لینک به زبان فارسی ببینید.
برای مشاهده اینجا را کلیک کنید


Another major form of energy is nuclear energy, the energy that is trapped inside each atom. One of the laws of the universe is that matter and energy can't be created nor destroyed. But they can be changed in form.
Matter can be changed into energy. The world's most famous scientist, Albert Einstein, created the mathematical formula that explains this. It is:





E = m c 2



This equation says: E [energy] equals m [mass] times c2 [c stands for the velocity or the speed of light. c2 means c times c, or the speed of light raised to the second power -- or c-squared.]


You can listen to Einstein's voice explaining this at: www.aip.org/history/einstein/voice1.htm
[ Depiction of Atom ] Please note that some web browser software may not show an exponent (raising something to a power, a mathematical expression) on the Internet. Normally c-squared is shown with a smaller "2" placed above and to the right of the c.

Scientists used Einstein's famous equation as the key to unlock atomic energy and also create atomic bombs.

The ancient Greeks said the smallest part of nature is an atom. But they did not know 2,000 years ago about nature's even smaller parts.
As we learned in chapter 2, atoms are made up of smaller particles -- a nucleus of protons and neutrons, surrounded by electrons which swirl around the nucleus much like the earth revolves around the sun.



Nuclear Fission

An atom's nucleus can be split apart. When this is done, a tremendous amount of energy is released. The energy is both heat and light energy. Einstein said that a very small amount of matter contains a very LARGE amount of energy. [Drawing of fuel rod assembly] This energy, when let out slowly, can be harnessed to generate electricity. When it is let out all at once, it can make a tremendous explosion in an atomic bomb. A nuclear power plant (like Diablo Canyon Nuclear Plant shown on the right) uses uranium as a "fuel." Uranium is an element that is dug out of the ground many places around the world. It is processed into tiny pellets that are loaded into very long rods that are put into the power plant's reactor.
The word fission means to split apart. Inside the reactor of an atomic power plant, uranium atoms are split apart in a controlled chain reaction.
In a chain reaction, particles released by the splitting of the atom go off and strike other uranium atoms splitting those. Those particles given off split still other atoms in a chain reaction. In nuclear power plants, control rods are used to keep the splitting regulated so it doesn't go too fast.
If the reaction is not controlled, you could have an atomic bomb. But in atomic bombs, almost pure pieces of the element Uranium-235 or Plutonium, of a precise mass and shape, must be brought together and held together, with great force. These conditions are not present in a nuclear reactor.
The reaction also creates radioactive material. This material could hurt people if released, so it is kept in a solid form. The very strong concrete dome in the picture is designed to keep this material inside if an accident happens.
[ Photo of
Diablo Canyon Nuclear Plant ] This chain reaction gives off heat energy. This heat energy is used to boil water in the core of the reactor. So, instead of burning a fuel, nuclear power plants use the chain reaction of atoms splitting to change the energy of atoms into heat energy.
This water from around the nuclear core is sent to another section of the power plant. Here, in the heat exchanger, it heats another set of pipes filled with water to make steam. The steam in this second set of pipes turns a turbine to generate electricity. Below is a cross section of the inside of a typical nuclear power plant.
[ Nuclear power plant drawing ]
Power plant drawing courtesy Nuclear Institute




Nuclear Fusion

[ Nuclear fusion drawing ] Another form of nuclear energy is called fusion. Fusion means joining smaller nuclei (the plural of nucleus) to make a larger nucleus. The sun uses nuclear fusion of hydrogen atoms into helium atoms. This gives off heat and light and other radiation. In the picture to the right, two types of hydrogen atoms, deuterium and tritium, combine to make a helium atom and an extra particle called a neutron.
Also given off in this fusion reaction is energy! Thanks to the University of California, Berkeley for the picture.
Scientists have been working on controlling nuclear fusion for a long time, trying to make a fusion reactor to produce electricity. But they have been having trouble learning how to control the reaction in a contained space.
What's better about nuclear fusion is that it creates less radioactive material than fission, and its supply of fuel can last longer than the sun.
From:www.energyquest.ca.gov



Ocean Energy

شما می توانید این موضوع را از لینک به زبان فارسی ببینید.
برای مشاهده اینجا را کلیک کنید


The world's ocean may eventually provide us with energy to power our homes and businesses. Right now, there are very few ocean energy power plants and most are fairly small. But how can we get energy from the ocean?
There are three basic ways to tap the ocean for its energy. We can use the ocean's waves, we can use the ocean's high and low tides, or we can use temperature differences in the water. Let's take a look at each.

Wave Energy

Kinetic energy (movement) exists in the moving waves of the ocean. That energy can be used to power a turbine. In this simple example, to the right, the wave rises into a chamber. The rising water forces the air out of the chamber. The moving air spins a turbine which can turn a generator. When the wave goes down, air flows through the turbine and back into the chamber through doors that are normally closed.
This is only one type of wave-energy system. Others actually use the up and down motion of the wave to power a piston that moves up and down inside a cylinder. That piston can also turn a generator.
Most wave-energy systems are very small. But, they can be used to power a warning buoy or a small light house.


Tidal Energy

Pictures of La Rance Tidal Station Another form of ocean energy is called tidal energy. When tides comes into the shore, they can be trapped in reservoirs behind dams. Then when the tide drops, the water behind the dam can be let out just like in a regular hydroelectric power plant. Tidal energy has been used since about the 11th Century, when small dams were built along ocean estuaries and small streams. the tidal water behind these dams was used to turn water wheels to mill grains.
In order for tidal energy to work well, you need large increases in tides. An increase of at least 16 feet between low tide to high tide is needed. There are only a few places where this tide change occurs around the earth. Some power plants are already operating using this idea. One plant in France makes enough energy from tides (240 megawatts) to power 240,000 homes.
This facility is called the La Rance Station in France. It began making electricity in 1966. It produces about one fifth of a regular nuclear or coal-fired power plant. It is more than 10 times the power of the next largest tidal station in the world, the 17 megawatt Canadian Annapolis station.

Ocean Thermal Energy Conversion (OTEC)

The idea is not new. Using the temperature of water to make energy actually dates back to 1881 when a French Engineer by the name of Jacques D'Arsonval first thought of OTEC. The final ocean energy idea uses temperature differences in the ocean. If you ever went swimming in the ocean and dove deep below the surface, you would have noticed that the water gets colder the deeper you go. It's warmer on the surface because sunlight warms the water. But below the surface, the ocean gets very cold. That's why scuba divers wear wet suits when they dive down deep. Their wet suits trapped their body heat to keep them warm. Power plants can be built that use this difference in temperature to make energy. A difference of at least 38 degrees Fahrenheit is needed between the warmer surface water and the colder deep ocean water.
Using this type of energy source is called Ocean Thermal Energy Conversion or OTEC. It is being demonstrated in Hawaii. More info on OTEC can be found on the archive pages for the Natural Energy Laboratory of Hawaii at: www.hawaii.gov/dbedt/ert/otec-nelha/otec.html
From:www.energyquest.ca.gov

Solar Energy

شما می توانید این موضوع را از لینک به زبان فارسی ببینید.
برای مشاهده اینجا را کلیک کنید.

We have always used the energy of the sun as far back as humans have existed on this planet. As far back as 5,000 years ago, people "worshipped" the sun. Ra, the sun-god, who was considered the first king of Egypt. In Mesopotamia, the sun-god Shamash was a major deity and was equated with justice. In Greece there were two sun deities, Apollo and Helios. The influence of the sun also appears in other religions - Zoroastrianism, Mithraism, Roman religion, Hinduism, Buddhism, the Druids of England, the Aztecs of Mexico, the Incas of Peru, and many Native American tribes.
We know today, that the sun is simply our nearest star. Without it, life would not exist on our planet. We use the sun's energy every day in many different ways.
When we hang laundry outside to dry in the sun, we are using the sun's heat to do work -- drying our clothes.
Plants use the sun's light to make food. Animals eat plants for food. And as we learned in Chapter 5, decaying plants hundreds of millions of years ago produced the coal, oil and natural gas that we use today. So, fossil fuels is actually sunlight stored millions and millions of years ago.
Indirectly, the sun or other stars are responsible for ALL our energy. Even nuclear energy comes from a star because the uranium atoms used in nuclear energy were created in the fury of a nova - a star exploding.
Let's look at ways in which we can use the sun's energy.

Solar Hot Water

Picture of house in 1911 with solar panels on roof In the 1890s solar water heaters were being used all over the United States. They proved to be a big improvement over wood and coal-burning stoves. Artificial gas made from coal was available too to heat water, but it cost 10 times the price we pay for natural gas today. And electricity was even more expensive if you even had any in your town! Many homes used solar water heaters. In 1897, 30 percent of the homes in Pasadena, just east of Los Angeles, were equipped with solar water heaters. As mechanical improvements were made, solar systems were used in Arizona, Florida and many other sunny parts of the United States. The picture shown here is a solar water heater installed on the front roof of a house in Pomona Valley, California, in 1911 (the panels are circled above the four windows).
Solar hot water system By 1920, ten of thousands of solar water heaters had been sold. By then, however, large deposits of oil and natural gas were discovered in the western United States. As these low cost fuels became available, solar water systems began to be replaced with heaters burning fossil fuels.
Today, solar water heaters are making a comeback. There are more than half a million of them in California alone! They heat water for use inside homes and businesses. They also heat swimming pools like in the picture.
Panels on the roof of a building, like this one on the right, contain water pipes. When the sun hits the panels and the pipes, the sunlight warms them.
That warmed water can then be used in a swimming pool.



Solar Thermal Electricity

Solar energy can also be used to make electricity. Some solar power plants, like the one in the picture to the right in California's Mojave Desert, use a highly curved mirror called a parabolic trough to focus the sunlight on a pipe running down a central point above the curve of the mirror. The mirror focuses the sunlight to strike the pipe, and it gets so hot that it can boil water into steam. That steam can then be used to turn a turbine to make electricity.
Luz Solar Power Plant In California's Mojave desert, there are huge rows of solar mirrors arranged in what's called "solar thermal power plants" that use this idea to make electricity for more than 350,000 homes. The problem with solar energy is that it works only when the sun is shining. So, on cloudy days and at night, the power plants can't create energy. Some solar plants, are a "hybrid" technology. During the daytime they use the sun. At night and on cloudy days they burn natural gas to boil the water so they can continue to make electricity.
Another form of solar power plants to make electricity is called a Central Tower Power Plant, like the one to the right - the Solar Two Project.
Sunlight is reflected off 1,800 mirrors circling the tall tower. The mirrors are called heliostats and move and turn to face the sun all day long.
Solar Two Project The light is reflected back to the top of the tower in the center of the circle where a fluid is turned very hot by the sun's rays. That fluid can be used to boil water to make steam to turn a turbine and a generator.
This experimental power plant is called Solar II. It was re-built in California's desert using newer technologies than when it was first built in the early 1980s. Solar II will use the sunlight to change heat into mechanical energy in the turbine.
The power plant will make enough electricity to power about 10,000 homes. Scientists say larger central tower power plants can make electricity for 100,000 to 200,000 homes.




Solar Cells or Photovoltaic Energy

We can also change the sunlight directly to electricity using solar cells. Solar cells are also called photovoltaic cells - or PV cells for short - and can be found on many small appliances, like calculators, and even on spacecraft. They were first developed in the 1950s for use on U.S. space satellites. They are made of silicon, a special type of melted sand.
When sunlight strikes the solar cell, electrons (red circles) are knocked loose. They move toward the treated front surface (dark blue color). An electron imbalance is created between the front and back. When the two surfaces are joined by a connector, like a wire, a current of electricity occurs between the negative and positive sides.
These individual solar cells are arranged together in a PV module and the modules are grouped together in an array. Some of the arrays are set on special tracking devices to follow sunlight all day long.
The electrical energy from solar cells can then be used directly. It can be used in a home for lights and appliances. It can be used in a business. Solar energy can be stored in batteries to light a roadside billboard at night. Or the energy can be stored in a battery for an emergency roadside cellular telephone when no telephone wires are around.
Some experimental cars also use PV cells. They convert sunlight directly into energy to power electric motors on the car.
But when most of us think of solar energy, we think of satellites in outer space. Here's a picture of solar panels extending out from a satellite.
From:www.energyquest.ca.gov





graphic depicting simple PV cell

Solar cells into arrays.

Solar panels in Carrisa Plains.

Solar panels on satellite.

Wind Energy

شما می توانید این موضوع را از لینک به زبان فارسی ببینید.
برای مشاهده اینجا را کلیک کنید.

Wind can be used to do work. The kinetic energy of the wind can be changed into other forms of energy, either mechanical energy or electrical energy. When a boat lifts a sail, it is using wind energy to push it through the water. This is one form of work.
Farmers have been using wind energy for many years to pump water from wells using windmills like the one on the right.
In Holland, windmills have been used for centuries to pump water from low-lying areas.
Wind is also used to turn large grinding stones to grind wheat or corn, just like a water wheel is turned by water power.
Today, the wind is also used to make electricity.
Blowing wind spins the blades on a wind turbine -- just like a large toy pinwheel. This device is called a wind turbine and not a windmill. A windmill grinds or mills grain, or is used to pump water.
The blades of the turbine are attached to a hub that is mounted on a turning shaft. The shaft goes through a gear transmission box where the turning speed is increased. The transmission is attached to a high speed shaft which turns a generator that makes electricity.
If the wind gets too high, the turbine has a brake that will keep the blades from turning too fast and being damaged.
You can use a single smaller wind turbine to power a home or a school. The small turbine on the right makes enough energy for a house. In the picture on the left, the children at this Iowa school are playing beneath a wind turbine that makes enough electricity to power their entire school.
We have many windy areas in California. And wind is blowing in many places all over the earth. The only problem with wind is that it is not windy all the time. In California, it is usually windier during the summer months when wind rushes inland from cooler areas, like the ocean to replace hot rising air in California's warm central valleys and deserts.
In order for a wind turbine to work efficiently, wind speeds usually must be above 12 to 14 miles per hour. Wind has to be this speed to turn the turbines fast enough to generate electricity. The turbines usually produce about 50 to 300 kilowatts of electricity each. A kilowatt is 1,000 watts (kilo means 1,000). You can light ten 100 watt light bulbs with 1,000 watts. So, a 300 kilowatt (300,000 watts) wind turbine could light up 3,000 light bulbs that use 100 watts!
As of 1999, there were 11,368 wind turbines in California. These turbines are grouped together in what are called wind "farms," like those in Palm Springs in the picture on the right. These wind farms are located mostly in the three windiest areas of the state:

  • Altamont Pass, east of San Francisco
  • San Gorgonio Pass, near Palm Springs
  • Tehachapi, south of Bakersfield
Together these three places in California make enough electricity to supply an entire city the size of San Francisco! About 11 percent of the entire world's wind-generated electricity is found in California. Other countries that use a lot of wind energy are Denmark and Germany. Once electricity is made by the turbine, the electricity from the entire wind farm is collected together and sent through a transformer. There the voltage is increase to send it long distances over high power lines.
From:www.energyquest.ca.gov




Picture of old wind mill.